[amsat-bb] Re: Sat-PC-32

[Jim K0SBH]

Thanks Stefan,
   
  Good answer and is most likely the right one. Just kind of funny with running both radios.
  I have used instatrack, Nova, and now PC-32 and I love PC-32. I used to use Nova to run the rotors and PC-32 to do the radios. Now I just use PC-32 for both. hi hi
   
  Jim, K0SBH 

Stefan Wagener <stefan_wagener at hotmail.com> wrote:
  Hi Jim.

It is question of preference. SatPC32 really prefers Kenwood over Icom. The
software is so closely attached (in love) with the TS2000 that it
desperately tries to keep the relationship going, even after the TS2000
broke off (for a while). However, it doesn't care for the Icom so much. The
910 can be gone or not. The program can quit anytime and move on. 


73, Stefan VE4NSA (Sorry, I couldn't resist)

PS. I hope that Erich will forgive me... :-)

-----Original Message-----
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of Jim K0SBH
Sent: December 4, 2006 7:45 PM
To: Amsat Amsat BB
Subject: [amsat-bb] Sat-PC-32

Hi,

Have question. I am using Sat-PC-32 V.12.4. When using with the IC-910H
and turning off the 910H first the program closes with no problem. When I
use it with the TS-2000X and turn off the radio, the program sometimes had
trouble closing. With the 2000X turned on the program always closes
perfectly. So am I missing something? 

Of course I always close the program first now. Just wondering

Thanks,

Jim, K0SBH
_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb