[amsat-bb] Re: TH-F6 Remote Control?

[Brad, K1GTo]

You may have already tried this, but I would download the TH-F6 memory
utility from Kenwood and try backing up or changing things on the radio with
that first. Once the "commercial app" is working, you know your interface is
good, and you can then move on to manually commanding the unit. Baby steps
=)


Try this link: 
http://kenweb1.kenwoodusa.com/KenwoodPortal/KenwoodComm/Resources/AMA_Softwa
reRCPMCP/MFX100.exe

As found on this page: 
http://kenweb1.kenwoodusa.com/KenwoodPortal/KenwoodComm/Support/AMASoftwareR
CPMCP.aspx


73 
K1gto

-----Original Message-----
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of Robert Bruninga
Sent: Tuesday, November 21, 2006 3:30 PM
To: amsat-bb at amsat.org
Subject: [amsat-bb] TH-F6 Remote Control?

Has anyone tried remote control of the TH-F6 HT?

We built the interface shown on
http://www.misobras.com/esquemas/ham/MOD/kenwood/TH-F7-1.htm

But using hyperterm and typing symple commands we get nothing.
We have pressed the menu-9 key and set it to PC.
We type a simple command like "ANT" and expect it to come back
with the setting in response.

Anyone done this?
Bob

_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb