[amsat-bb] Re: G5400 and TS-790 under Lunix??

[John Melton]

Hi Will,

I have used a KCT with Linux, but it was some time ago.

The driver I used was from f6fbb at 
ftp://ftp.f6fbb.org/pub/f6fbb/distrib/kct/.  It is quite old now, so may 
need some changes to work with the latest kernels.

I still have a KCT but not a computer I can plug it into.  If I get a 
chance this weekend I will download the driver and see if I can get it 
installed.

Regards,

John g0orx/n6lyt


William Liporace - NA2NA wrote On 09/06/06 01:29,:

>I am getting ready to learn and move to Linux.  I currently have a TS-790 and a Yaesu G-5400 rotor.
>Can it be controlled under Linux?  
>What kind of controller can I get?
>I may even try to use a KCT board that I have. I have never really had it working, does any one have this working under Linux?
>
>Any help and suggestions would be grateful!!
>
>73 es TNX  Will NA2NA
>telnet://na2na.net 
>AR-Cluster Node
>_______________________________________________
>Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>  
>

-- 
--
  John Melton
  Sun IT CTO
  Office: +44 1252 421708 (ext 21708)
  Mobile: +44 7714 708861