[amsat-bb] Re: Bad and good news XE2AT !! TH-F6A

[Greg D.]

I think you are referring to the selectivity of the TH-F6 is not the same on 
A and B.  The B-side is very wide and is best used for the uplink, while the 
A side is more sensitive and selective, and is best for the downlink.

Good advice,

Greg  KO6TH


----Original Message Follows----
From: "Coppock, Robert L, WWCS" <robertinorbit at att.com>
To: <amsat-bb at amsat.org>
Subject: [amsat-bb] Re: Bad and good news XE2AT !!  TH-F6A
Date: Wed, 6 Sep 2006 18:33:30 -0400


   hola,      i have found that switching the TX / RX between
               VFOs  A and B sometimes helps with these problems.
               there is plenty of noise and intermod around here
               (cm97).  i hope you get some contacts, maybe i
               will give it a try.

                good luck, 73,   robert   kg6pib  amsat # 35488

_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb