[amsat-bb] Re: SYMEK TNC

[jjwhite@myawai.com]

Thank you Pedro, but that's not the question.

We are trying to use these TNCs with our own protocol.  Not AX.25.   
They work fine using AX.25 and KISS. But in KISS they will not pass  
our non-AX.25 protocol.

The SPIRIT works fine with our protocol.

So we are looking for clues as to how to get them to work in KISS with  
a protocol that is simply data wrapped in flags.

Jim

Quoting Pedro Cruz <pccu2jx at sapo.pt>:

> Hi Jim
>
> I have the TNC3S and it work just fine in kiss mode with serval software.
>
>
> Best 73 !
>
> Pedro Cruz  - cu2jx
> ----- Original Message ----- From: <jjwhite at myawai.com>
> To: <amsat-bb at amsat.org>
> Sent: Thursday, April 19, 2007 6:51 PM
> Subject: [amsat-bb] SYMEK TNC
>
>
>> I would appreciate hearing from anyone who has successfully used a
>> TNC3 or TNC31 with any protocol other than AX.25 or TCP/IP, in KISS
>> mode.
>>
>> Jim
>> jim at coloardosatellite.com
>> wd0e at amsat.org
>>
>> ----------------------------------------------------------------
>> This message was sent using IMP, the Internet Messaging Program.
>>
>>
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>>



----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.