[amsat-bb] Re: Echo Telemetry website

[Patrick McGrane]

hello george- I have 9600 capable radio (FT8800) connected to sound card 
via buxcomm interface but I dont know if I can use the same interface 
with the isolation transformers on 9600. Currently wired for 1200. 
Waiting to hear from buxcomm about 9600 use. Thanks to mineo for posting 
the telemetry. I like the graphical flow chart version you used the 
first time. Its refreshing to see some technical information about echo.
Thanks mineo!

73, pat n2oeq

------- Original Message -------
>From    : George Henry[mailto:ka3hsw at earthlink.net]
Sent    : 7/31/2007 9:56:31 PM
To      : amsat-bb at amsat.org
Cc      : 
Subject : RE: [amsat-bb] Re: Echo Telemetry website

 If you have a radio with discriminator output (9600 baud packet-ready) 
and a 
decent soundcard, you have 9600 capability:  download the AGW Packet 
Engine 
and AGWTerm from www.elcom.gr/sv2agw and you can receive 9600 baud 
packet 
from the satellites.  Accurate doppler tuning (read: computer-controlled 
with very accurate clock setting on the computer) is an absolute MUST.

George, KA3HSW


----- Original Message -----