[amsat-bb] Re: N-type connectors for LMR-400 Ultraflex

[Jim Jerzycke]

Either the correct connectors from Times Microwave, or
the RF Industries connectors for "9913" will work.
Sounds like whoever you got the connectors from gave
you the wrong ones, as I've installed hundreds of N
connectors on this type of coax without ever having to
trim some strands from the center conductor.

Times connectors:
TC-400-NM crimp
TC-400-NMC clamp type

RF Industries:
RFN-1002-1SI clamp type
RFN-1006-3I crimp type

73, Jim  KQ6EA


--- David J <n4csitwo at bellsouth.net> wrote:

> As I recall, the last time I had to attach N
> connectors to LMR-400 Ultraflex
> coax, I had to cut off at least 2 strands of the
> cable's center conductor in
> order to make it fit into the N connector I was
> given. Can anyone recommend
> a preferred N connector plug that is designed to fit
> LMR-400 Ultraflex
> without having this problem?
> 
>  
> 
> Dave, AA4KN
> 
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are
> those of the author.
> Not an AMSAT-NA member? Join now to support the
> amateur satellite program!
> Subscription settings:
> http://amsat.org/mailman/listinfo/amsat-bb
>