[amsat-bb] Re: Kenwood TH-D7 split Tx/Rx

[Bob Bruninga]

The APRS mode TX/RX is in the APRS menu.  There is a separeate TX/RX setting for PACKET mode in the radio menu.  You maybe using the wrong one.

Bob, WB4APR


---- Original message ----
>Date: Sat, 13 Dec 2008 19:10:09 -0800
>From: "Greg D." <ko6th_greg at hotmail.com>  
>Subject: [amsat-bb]  Kenwood TH-D7 split Tx/Rx  
>To: <amsat-bb at amsat.org>
>
>
>Hi folks,
>
>Ok, so in the manual it says that I can set up the D7 to transmit on one side, and receive on the other, with APRS.  With the ISS seemingly in that sort of mode, this would seem to be the configuration to use.  APRS menu 2-M gives me that choice, but when I have either of the spilt modes selected (Tx-A, Rx-B, or Rx-A, Tx-B), I can't turn on APRS mode.  Packet turns on, but not APRS.
>
>I tried transmitting blind (simplex) on the last pass, but it would be good to be able to hear what's going on too.
>
>What is the magic spell to run on split operations with APRS?
>
>Thanks,
>
>Greg  KO6TH
>
>
>_________________________________________________________________
>Send e-mail anywhere. No map, no compass.
>http://windowslive.com/Explore/hotmail?ocid=TXT_TAGLM_WL_hotmail_acq_anywhere_122008
>_______________________________________________
>Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb