[amsat-bb] Re: geloso 3-pin jack

[i8cvs]

Hi Scott,

A 3 pin jack female 17 mm outside diameter was used by Geloso to connect the
cord of a microphone into a 3 pin male socket 20 mm in diameter fitted into
the front panel of a Transmitter G 4/225 in my hand.

In general Geloso uses the above non standar connector in all models of
RX/TX  for radioamateurs early in the 1950-1960

If this is your case I can send to you a scanned copy of the original
schematic diagram.

73" de

i8CVS Domenico


----- Original Message -----
From: "Scott Smith" <ve6itv at shaw.ca>
To: "amsat" <amsat-bb at amsat.org>
Sent: Sunday, January 13, 2008 6:13 AM
Subject: [amsat-bb] geloso 3-pin jack


> hi, maybe some of the older chaps might remember this kind of jack. I
would like to know where i could buy one and if someone could send me a
diagram how to make a cord to go from the geloso (3pin out-put plug) to a
1/4 mono jack. Hope all had a very good new year.  73 de ve6itv  Scott
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>