[amsat-bb] Re: AO-27 Telem

[Mike Rupprecht]

Hi Chris,

yes, I agree that. 

But I think it should be no secret and "we" can ask AMRAD or the AO-27 team
for this telemetry equations. 

There are some solutions to generate a KISS file with soundcard based
software (e.g. MixW32). It is only few hours of programming-work in order to
generate the real telemetry data from a KISS File - IF you knows the
equations of the channels.

I believe then it would be much easier to collect telemetry -> world-wide!

73, Mike
DK3WN


 
 
-----Ursprüngliche Nachricht-----
Von: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] Im
Auftrag von Gould Smith
Gesendet: Dienstag, 29. Januar 2008 15:53
An: Chris Bloy; amsat-bb at amsat.org
Betreff: [amsat-bb] Re: AO-27 Telem

Hi Chris,

You can use your recording of the telemetry data.  Simply connect the 
recording output into your modem.  AMRAD hasn't published the telemetry 
decoding equations, so you have to use their software to convert the data to

their format and send it in to them for analysis.

Even though you can decode and store the data, the data is not very useful 
to you since you can't equate particular channels and values.

73,
Gould
----- Original Message ----- 
From: "Chris Bloy" <chris at photofuture.co.uk>
To: <amsat-bb at amsat.org>
Sent: Tuesday, January 29, 2008 9:04 AM
Subject: [amsat-bb] Re: AO-27 Telem


> Hi Gould,
>
> Thank for that, I have looked at that page before, but its the actual
> decoding that I cannot seem to do.. I cannot quickly turn my TNC on when I
> am in voice mode, hence I though i could translate the recording so to
> speak..
>
> Just for reference, I can only use my TH-D7 portable as I have no room for
> antennas at home..
>
> thanks,
>
> Chris
>
>
>
> -----Original Message-----
> From: "Gould Smith" <gouldsmi at bellsouth.net>
> To: "Chris Bloy" <chris at photofuture.co.uk>, <amsat-bb at amsat.org>
> Date: Tue, 29 Jan 2008 08:57:34 -0500
> Subject: Re: [amsat-bb]  AO-27 Telem
>
>
> Hello Chris,
>
> Here is the information on logging and reporting the telemetry for AO-27.
>
> http://www.ao27.org/AO27/tlm.shtml
>
> 73,
> Gould, WA4SXM
> ----- Original Message ----- 
> From: "Chris Bloy" <chris at photofuture.co.uk>
> To: <amsat-bb at amsat.org>
> Sent: Tuesday, January 29, 2008 8:12 AM
> Subject: [amsat-bb] AO-27 Telem
>
>
>> Hi All,
>>
>> Can anyone tell me how to decode the telemetry from AO27?
>>
>> I have tried to use MIXW in Packet mode and RTTY mode, but all I seem to
>> get
>> is the date and nothing else? I even tried to feed it through AGWE to see
>> if
>> that would work.. I use AO27 all the time and use a minidisc recorder to
>> record my passes, and always capture the telem data at the end.. it would
>> be
>> good if someone could help me out on this one?
>>
>> Thanks,
>>
>> Chris
>>
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite 
>> program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb 

_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb


____________
Virus checked by G DATA AntiVirusKit
Version: AVK 18.2572 from 28.01.2008
Virus news: www.antiviruslab.com