[amsat-bb] Re: Delfi C3 transponder frequencies ?

Alan Cresswell alancresswell at xtra.co.nz
Sun Jul 27 13:26:03 PDT 2008


Hi all,

On the one good pass over ZL so far I had to use a +6kHz offset on my uplink
to receive on the nominal downlink frequency.
i.e. satellite input frequency of 535.556 (nominal 435.550) to hit the
145.900 satellite output frequency.

Alan
ZL2BX

-----Original Message-----
From: amsat-bb-bounces at AMSAT.Org [mailto:amsat-bb-bounces at AMSAT.Org] On
Behalf Of OZ1MY
Sent: Sunday, 27 July 2008 09:57
To: AMSAT-BB
Subject: [amsat-bb] Delfi C3 transponder frequencies ?

Hi all,
The transponder was working at the pass with AOS at 
0926 UTC here in Copenhagen.
Had a couple of QSOs with HA2RD and PE1ITR.

As far as I can make out the frequencies are different 
from the published ones.

Just after the transponder was turned on I har to go 
to an uplink of 435.565 MHz to get 145.900 MHz down.
This is the nominal pair I used in SatPC32.

After some time had to adjust the uplink down to 
435.563 MHz.

Can someone confirm this ?
73 OZ1MY
Ib

_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



More information about the AMSAT-BB mailing list