[amsat-bb] ao-51 radio programming

[Eric Fort]

Thanks to all who responded so far.  These are the frequencies as I
understand them:

145.92      435.310  not needed for low passes
145.92      435.305
145.92      435.300
145.92      435.295
145.92      435.290 not needed for low passes

qrp repeater

145.88   435.160
145.88   435.155
145.88   435.150
145.88   435.145
145.88   435.140

Does ao-51 need a tone?

also qrp.  is that on the satellite end or the ground station end? (to use
the qrp mode do I need flea power and a wet string or an LNA cooled by
liquid helium  and a 305M dish? - ok I'm being facicous but you get the
idea...)

Eric
af6ep
Eric
af6ep




On Sun, Nov 9, 2008 at 2:48 PM, Andrew Glasbrenner <
glasbrenner at mindspring.com> wrote:

> You are likely to get some varying answers, but 145.92 paired with 435.310,
> .305, .300, .295, and .290 for the normal repeater, and 145.88 with 435.160,
> .155, .150, .145, .140 for the qrp repeater when active. Some folks like to
> put in the uplink +/- 5khz Doppler shift too, but it's really fine either
> way.
>
> 73, Drew KO4MA
>
> ----- Original Message ----- From: "Eric Fort" <eric.fort at gmail.com>
> To: "AMSAT-BB" <amsat-bb at amsat.org>
> Sent: Sunday, November 09, 2008 5:40 PM
> Subject: [amsat-bb] ao-51 radio programming
>
>
>  I have a vx-6 I'd like to set up to work ao-51.  what frequency pairs
>> should
>> go into the memories?
>>
>> Eric
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>>
>
>