[amsat-bb] Re: Transcr Question

w7lrd@comcast.net w7lrd at comcast.net
Fri Nov 21 18:56:57 PST 2008


Hi Dave- I have used an IC 471A and a IC 251A for years.  The only issue is with the older Icoms you need an outboard preamp for the mic and I don't believe they can interface for doppler, at least I never tried.  They can be had very reasonably.  
73 Bob W7LRD
--
"if this were easy, everyone would be doing it"

-------------- Original message -------------- 
From: "D. Mynatt" <dave at mynatt.biz> 

> Hi group, I still struggling through selecting a radio for 2m and 70cm 
> satellite work. I already have a G-5500 and a 2m and 432 antenna from M-Squared, 
> and the computer interface, and pre-amps. I'm thinking I'm starting okay but 
> now the hard part -the Radio. 
> 
> A friend has a Yaesu FT-7800 unit he wants to sell me. I'm all atwitter 
> thinking that two radios, one for each band, is better than one and need some 
> insight. 
> 
> I can get some older ICOMs (471A and 271A) and was wondering what the group 
> thought of (1) two radios versus one; (2) the Yaesu FT-7800; and (3) the ICOM 
> 471 and 271 as my base station. 
> 
> I'm thinking I'll need CAT and I'm not sure the FT has it. 
> 
> What is one to do? Advice solicited! 
> 
> Dave/KA0SWT 
> _______________________________________________ 
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author. 
> Not an AMSAT-NA member? Join now to support the amateur satellite program! 
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb 


More information about the AMSAT-BB mailing list