[amsat-bb] Re: KLM polarity switch schematic

[i8cvs]

Hi Angelo And Dave

Over the +12 volt DC connector there is a 1000 pF disk capacitor connected from the center of DC connector to the ground on PCB 
In addition I have added a diode IN4007 to protect the relay winding from the high voltages developing across the coil during circuit openings.
The katode of the diode must be connected to the central pin of the DC connector while the anode is connected to the ground on PCB

73" de 

i8CVS Domenico
  ----- Original Message ----- 
  From: Angelo Friend 
  To: i8cvs ; Angelo Friend ; AMSAT-BB 
  Cc: dguimon1 at san.rr.com 
  Sent: Saturday, October 18, 2008 7:23 PM
  Subject: Re: [amsat-bb] KLM polarity switch schematic


   Hi Domenico and Dave,

   Thanks for the pics and the help . They helped a lot. The other question I have is that there is 3 componets on the power connector and one on the ground side of the
  boom screw.  I cant tell what they are. I have two on the power connector and nothing on the ground pin. I know they need to be changed. Can you help with this??

  Thanks 


  Angelo



   
    ----- Original Message -----
    From: i8cvs 
    To: "Angelo Friend" , "AMSAT-BB" 
    Subject: Re: [amsat-bb] KLM polarity switch schematic
    Date: Fri, 17 Oct 2008 22:44:19 +0200


    Hi Angelo,

    In a separate email I have sent to you 3 enlarged pictures of the PCB
    for the KLM polarity switcher.

    Please note that the holes from one side to the other side of the PCB
    are metallized.

    When soldering the new relay do not use a too high temperature for the
    soldering iron otherwise the studs of relay becames oxidated (blue color)

    If possible use solder from ALPHA METALS INC with 62 Sn, 36 PB and
    2 Ag

    73" de

    i8CVS Domenico

    ----- Original Message -----
    From: "Angelo Friend" 
    To: 
    Sent: Friday, October 17, 2008 1:59 PM
    Subject: [amsat-bb] KLM polarity switch schematic


    > I just took down my polarity switch for my 2 meter KLM and I need to do
    > some work with it. I just receivedthe new relay to install but I may have
    > damaged a trace or two. So anyone have pictures (without reply
    > installed) or schematic of the board itself??? Thanks in advance. 73 de
    > Angelo
    >
    > --
    > Be Yourself @ mail.com!
    > Choose From 200+ Email Addresses
    > Get a Free Account at www.mail.com
    >
    > _______________________________________________
    > Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
    > Not an AMSAT-NA member? Join now to support the amateur satellite program!
    > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
    >


  -- 
  Be Yourself @ mail.com!
  Choose From 200+ Email Addresses
  Get a Free Account at www.mail.com!