[amsat-bb] Re: AR2 432 MHz preamp - not working?

[Mark Lunday]

Thanks, Alan.


Mark Lunday
WD4ELG
Greensboro, NC - FM06be
wd4elg at arrl.net
http://wd4elg.net
http://wd4elg.blogspot.com



-----Original Message-----
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of Alan P. Biddle
Sent: Saturday, December 12, 2009 5:00 PM
To: 'Mark Lunday, WD4ELG'; 'amsat-bb'
Subject: [amsat-bb] Re: AR2 432 MHz preamp - not working?

Mark,

I would first check the current draw, which should be around 170-180 ma in
RX.  And there is always the old trick of hooking it up backwards.  Been
there, done that.  ;)  If that is good, then look at the coax cables.

Alan
WA4SCA



-----Original Message-----
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of Mark Lunday, WD4ELG
Sent: 12 December, 2009 13:50
To: 'amsat-bb'
Subject: [amsat-bb] AR2 432 MHz preamp - not working?

Was working before the QTH relo.  Reinstalled in the attic.  The 144 preamp,
same power supply, working just fine.

 

Any ideas on how to check w/o taking it apart?  The connectors have not been
modified.

 

As always, I am certain it is something simple.

 

 

Mark Lunday

WD4ELG

Greensboro, NC - FM06be

 <mailto:wd4elg at arrl.net> wd4elg at arrl.net

 <http://wd4elg.net> http://wd4elg.net

 <http://wd4elg.net> http://wd4elg.blogspot.com

 

 

_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb


_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb