[amsat-bb] Re: DJ-G7 - BNC-to-SMA Adapter

[Alan P. Biddle]

I will second that recommendation.  I took a series of pictures of my new
rig, sent them to Stephen, and he came up with a recommendation which is a
perfect fit for the DJ-G7.  It may not be on that list, but he will know
which one you need.  It will even handle the Pryme AL-800 antenna.  Probably
the best made component on my rig.  ;)  He runs a small operation, but is a
real craftsman.

Alan
WA4SCA



-----Original Message-----
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of Clint Bradford
Sent: 27 December, 2009 14:17
To: amsat-bb at amsat.org
Subject: [amsat-bb] Re: DJ-G7 - BNC-to-SMA Adapter

>> ... my arrow antenna's BNC connector doesn't plug directly to the DJ-G7's
SMA antenna jack ...

I hope you didn't order the Yaesu CN-3 adapter. It should be taken off the
market. It provides absolutely no protection/strain relief to your new HT's
SMA connector when in use.

Stephen Gulyas makes "intelligent" BNC-toSMA adapters ... which have a hard
rubber gasket that "mates" to the top of a radio. VERY protective from the
stress and strain we place on our radios when changing out antennas.

Scroll down half of this page to download a copy of what Stephen offers ...

http://www.work-sat.com

Look for: Stephen Gulyas's BNC-to-SMA adapters (76kb .pdf)

Enjoy what Santa brought you!

Clint Bradford, K6LCS




_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb