[amsat-bb] Re: G-5500 stuck problem

[Greg D.]

To differentiate between a stuck gear or the limit switch (or similar), can you measure the drive current going to the rotor?  If it goes up at the 180 mark, it's a jam; if it goes to zero, it's the limit switch.

Also, what does the controller's meter indicate?  Maybe it's shutting it down for some reason.

Greg  KO6TH


> From: mail at hatzakis.net
> To: amsat-bb at amsat.org
> Date: Thu, 1 Jan 2009 14:10:41 -0800
> Subject: [amsat-bb]  G-5500 stuck problem
> 
> Have a G-5500 and suddenly the rotor stops moving clock-wise past 180.  I
> stood under it and it makes no particular noises at that point, just stops
> perfectly at 180.  Was working the day before and flawlessly for the last 4
> years.  
> 
> It stops so quietly, it almost sounds like the limit switch or the
> controller is stopping the motor.  The elevation works perfectly and the
> rotation works fine from zero to 180.  If it were a bad gear or something
> like that, I would expect it to grind or make some funny sounds
> 
> It is a royal pain to take the thing down; any ideas on debugging without
> taking the thing down?
> 
> Michael
> 
> 
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

_________________________________________________________________
Send e-mail anywhere. No map, no compass.
http://windowslive.com/oneline/hotmail?ocid=TXT_TAGLM_WL_hotmail_acq_anywhere_122008