[amsat-bb] Re: ANDE-2 Deployment

[jmfranke]

No he means FX.25:

>From the Milcom/BTown blogs:

"The communications board contains the transmitter and receiver. The 
transmitter operates at 2 meters and can put out up to 1 watt of signal. 
Power level is adjustable. The transmitter can operate at 1200 baud AFSK and 
9600 baud FSK. The transmitter uses the AX.25 protocol. An experimental 
FX.25 protocol will be tested that adds forward error correction capability 
to the AX.25 protocol and still allows typical TNCs to decode the packets.

John

--------------------------------------------------
From: "Nigel G8IFF/W8IFF" <nigel at ngunn.net>
Sent: Wednesday, July 29, 2009 1:06 PM
To: "Robin Theunis" <robint91 at gmail.com>
Cc: "Ivan Galysh" <ivan.galysh at nrl.navy.mil>; <amsat-bb at amsat.org>
Subject: [amsat-bb] Re: ANDE-2 Deployment

> You mean AX25 TNC?
> Your local amateur radio dealer should have them or you can implement it
> is software.
> Free programmes are available.
>
> Robin Theunis wrote:
>> Where can you get those FX-25 TNC?
>>
>>
>> Robin
>> ON8RTH
>>
>>
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>