[amsat-bb] Fw: Re: LVB Tracker and HRD Sat Tracker setup Problem

[R. Chastain]

The G6LVB unit also works great with Orbitron and the Wisp driver.
 
RoD
KD0XX

--- On Mon, 3/2/09, Mark L. Hammond <marklhammond at gmail.com> wrote:

From: Mark L. Hammond <marklhammond at gmail.com>
Subject: [amsat-bb] Re: LVB Tracker and HRD Sat Tracker setup Problem
To: amsat-bb at amsat.org, "racer5039" <racer5039 at q.com>
Date: Monday, March 2, 2009, 9:22 PM

Hi Marv,

I don't think that HRD supports a control box in either EasyComm or GS232
modes yet, so the LVB Tracker isn't going to work.   It is still in the
"developmental" stage as I recall.  So, you probably cannot get it to
work right with that program...

So--you might want to check out SatPC32.  It's a super program, and if/when
you register, ALL of the money goes to AMSAT!

73,

Mark N8MH

>    * Subject: [amsat-bb] LVB Tracker and HRD Sat Tracker setup Problem 
>    * From: "racer5039"
<<mailto:racer5039 at DOMAIN.HIDDEN>racer5039 at xxxxx> 
>    * Date: Mon, 2 Mar 2009 18:22:47 -0600 
>
>----------
>
>I got my LVB Tracker box today and while going through the setup I have
found a 
>couple of things.
>To start off. I am using HRD 4.1 B2055, Sat Tracker 4.1 B 2019.
>Radio is a Kenwood 2000 Rotor is the G-5500
>In the rotator set up of HRD there is no option for the GS 232B so I have
no 
>control of the ELEV.
>I have looked thought the other posts on HRD site but cant seem to find any

>talk of a fix for this.
>I have check the com to the rotor and can move them by hand just fine with
both 
>the GS 232 & EasyComm.
>Can someone point me to the right area to fix this problem please.
>Thanks 
>Marv
>N0FJP


Mark L. Hammond  [N8MH]
_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb