[amsat-bb] Re: Remote control of the IC-910H

[Alan]

Werner, you are absolutely correct - page 79 of the manual - command 14.

Thanks for the correction and my apologies to Icom owners for lumping the
IC910H in with the Yaesu FT-847.

... Alan
 

> -----Original Message-----
> From: Werner H. Berli [mailto:w.h.berli at bluewin.ch] 
> Sent: March 15, 2009 6:41 AM
> To: Alan
> Cc: AMSAT-BB at amsat.org
> Subject: Re: [amsat-bb] Re: Remote control of the IC-910H
> 
> Alan wrote:
> 
> > ...
> > I believe the key issues for remote control of a station are:
> > 
> > 1 - the command set available for that radio.  E.g. the IC-910H and 
> > FT-847 do not have CAT control of AF, MIC and RF Power.  So 
> how do you 
> > adjust that remotely?  Do don't.
> 
> With the IC-910H RF-Power, Mic-Gain, AF-Gain & RF-Gain are 
> adjusted with Command 14 and Subcommands as follows:
> 
> Cmd 14, Subcmd 01 AF-Gain, 0 = Full CCW, 255 = Full CW Cmd 
> 14, Subcmd 02 RF-Gain, 0 = Full CCW, 255 = Full CW Cmd 14, 
> Subcmd 0A RF-Pwr,  0 = Full CCW, 255 = Full CW Cmd 14, Subcmd 
> 0B Mic-Gain,0 = Full CCW, 255 = Full CW
> 
> I want to used RDP via LAN or WLAN
> 
> Thank you all for your comments
> 
> 73 de Werner, HB9US
> 
>