[amsat-bb] Re: Hygain Sat Antenna's and SSB UEK3000 Sat.
w7lrd@comcast.net
w7lrd at comcast.net
Sat May 9 10:31:49 PDT 2009
Hi Norman-Back in the days of A0-40 (sobsob) I used (still do) a 3731AA downconverter with a three foot off center dish (primestar). I ran about 50 feet of RG6 and I found at times I still needed additional attenuation. I applaud you getting ready for the next HEO! If we all did that it might apply some pressure "somewhere".
73 Bob W7LRD
----- Original Message -----
From: "Norman W Osborne" <ve3cje at gmail.com>
To: amsat-bb at amsat.org
Sent: Saturday, May 9, 2009 8:44:12 AM GMT -08:00 US/Canada Pacific
Subject: [amsat-bb] Hygain Sat Antenna's and SSB UEK3000 Sat.
Hello to All,
Looking for suggestions for feed lines to my preamps, could I use RG213-U ?
I am thinking this should be ok as both lines will be only about 10ft in
length.
>From the preamps, I am using hard line.
I also have a UEK3000 receive converter for 2.4 , for feedline, could I get
away with RG6, same cable used for sat TV.
the run will about 80 ft....
Getting setup for future HEO.s
Any suggestion greatly appreciated and many thanks in advance.
Norman
_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB
mailing list