[amsat-bb] SatPC32 not switching modes on 910H

[K7WIN - Jeff]

SatPC32 is not automatically switching from NOR to REV when required. I have
verified that the Doppler.sqf file is configured correctly. I have to
manually switch the satellite mode.

I am using the ICOM CT-17 interface.

Thanks,
Jeff - K7WIN

-----Original Message-----
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of OZ1MY
Sent: Saturday, November 07, 2009 1:37 AM
To: saamsat at intekom.co.za; AMSAT-BB
Subject: [amsat-bb] SO-67 over Europe thanks for test

Hi all,
SO-67 worked great over Europe this morning.
The downlink signal is the largest I have seen for years :-)

I used FMN with mike gain turned down. That is far the best way 
to work the uplink.
Some stations with a too wide deviation even made the downlink 
change amplitude - or cut it off. I used normal FM on the receive 
side.

Worked G3VZV and IZ1ERR. Lots of other stations on.

Thanks for a new satellite for us to use.
73 OZ1MY
Ib

_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb