[amsat-bb] Re: SatPC32 Auto Doppler

[Erich Eichmann]

Hello Howard,
you can not explicitely disable automatic Doppler correction but leave
transparent tuning enabled. The only "trick" I know is:
Select a geostat. satellite that is in range for you (i.e. LES 9). The 
Doppler shift
will be close to 0 and the Doppler shift change will be (almost) 0. In 
Doppler.SQF enter a data line with the wanted  basic frequencies. I tested 
ASTRA 1A (audible in Europe) which I added to group "Geostat" in menu 
"Satellites".  The Doppler shift  on UHF is about 30 Hz and almost no 
changes.

73s, Erich, DK1TB

----- Original Message ----- 
From: "Howard Kowall" <hkowall at shaw.ca>
To: "AMSAT-BB at amsat.org" <amsat-bb at amsat.org>
Sent: Tuesday, November 17, 2009 10:16 PM
Subject: [amsat-bb] Re: SatPC32 Auto Doppler


> Follow up to my last post
> So really what I want to do is to make 2 tranceiver,to act like a
> FT847,FT736,IC910,etc.
> Thanks again
> Howard
> VE4ISP
>
> ----- Original Message ----- 
> From: "Howard Kowall" <hkowall at shaw.ca>
> To: "AMSAT-BB at amsat.org" <amsat-bb at amsat.org>
> Sent: Tuesday, November 17, 2009 3:06 PM
> Subject: [amsat-bb] SatPC32 Auto Doppler
>
>
>> Hello to everyone
>> Is it possible to use SatPC32 12.8a without auto Doppler correction?
>> I use 2 separate transceiver one for uplink the other for downlink,all I
>> want to do is be able to change the downlink freq. and let the uplink
>> follow according to the Doppler sqf file.I want no automatic Doppler
>> correction just transparent tuning.
>> Thanks to all who read this
>> Howard
>> VE4ISP
>>
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>