[amsat-bb] Re: SatPC32 Not Tuning

Joel Black jbblack68 at gmail.com
Tue Oct 6 04:24:39 PDT 2009


Nothing like getting a reply from the author.  :)  Thanks, Erich, that 
worked.  I set the CAT interval to 50 and all is well.

Thanks to all the other replies as well.  :)

73,
Joel, W4JBB

Erich Eichmann wrote:
> Hi Joel,
> the program updates the radio frequencies only when the change of the
> Doppler shift of the higher of both frequencies (with AO-51 mode V/U the
> downlink) exceeds the "interval". The interval for FM sats is 600 Hz by
> default (menu "CAT"). Decrease it  to - say - 50. Then watch the change of
> the  Doppler shift of the downlink in the SatPC32 frequency window. When
> the Doppler shift of the downlink changed by  50 Hz or more the program
> should update both radio frequencies.  See also sect. D 4 (menu "CAT") in
> the manual.
>
> 73s, Erich, DK1TB
>
> ----- Original Message ----- 
> From: "Joel Black" <jbblack at charter.net>
> To: "Amsat Reflector" <amsat-bb at amsat.org>
> Sent: Tuesday, October 06, 2009 5:16 AM
> Subject: [amsat-bb] SatPC32 Not Tuning
>
>
>   
>> I am trying to get SatPC32 v12.8 to automatically tune my FT847.  When
>> the program first comes up, the radio is initialized as indicated by the
>> "CAT" display and when I click on a satellite, the radio tunes to the
>> correct satellite.  That's where it stops; it no longer changes the
>> frequency of the radio.  If I turn off and turn back on CAT control, it
>> will update once and will then quit again.  I have the same problem with
>> my FT-857.
>>
>> I have read the help and .SQF files, but I cannot seem to find the right
>> combination.  I have changed the baud rate of the radio and the program
>> to 4800, 9600, and 57.6k and made the corresponding changes with the CAT
>> delay value as recommended by the manual.  I have not yet tried
>> uninstalling and re-installing the app.
>>
>> I am running Vista 32bit and using a USB-to-serial converter which works
>> with everything else.  The same converter works with the HRD 5.0
>> Satellite Tracker.  Problem is, I cannot get HRD to accept sub-audible
>> tones so I can work AO-51.  I don't know if it's a limitation of the
>> program or cockpit error.
>>
>> Any suggestions, known issues, or anyone else having the same problem(s)?
>>
>> Thanks,
>> Joel, W4JBB
>>     
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com
> Version: 8.5.420 / Virus Database: 270.14.4/2416 - Release Date: 10/05/09
> 18:23:00
>
>
>
> --------------------------------------------------------------------------------
>
>
>   
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>>
>>     
>
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
>   



More information about the AMSAT-BB mailing list