[amsat-bb] Re: KPC-9612+ with TS-2000

[Nathaniel S. Parsons]

I should add that I'm using the following pin number connection:

KPC: As you look at the connector on the rear panel, it goes
5 4 3 2 1
 9 8 7 6

TS-2000: As you look at the connector on the rear panel, it goes:
13
9 10 11 12
5 6 7 8
1 2 3 4

On Sun, Apr 25, 2010 at 2:51 PM, Nathaniel S. Parsons <nsp25 at cornell.edu> wrote:
> Hi everyone,
>
> Thanks for the help with our 4800 bps issue. We haven't found a
> solution yet, but we're working on it, and I'll let you know when we
> have something figured out.
>
> Just now, I found a Kantronics KPC-9612+ lying around the lab, and
> would like to fire it up with our TS-2000 to see if it's still in
> working order. Can someone check to see if I've figured out the pinout
> correctly? I'll put the KPC pins on the left, and the TS-2000 pins on
> the right.
>
> 1 (Audio out) - 11 (Mic in)
> 2 (Carrier detect) - 5,7 (Main/sub squelch)
> 3 (PTT) - 9 (PTT)
> 4 (CTRLB) - Not connected
> 5 (RXA) - 1,3 (Main/sub out)
> 6 (GND) - Any of 4,8,12 (GND)
> 7 (Ext-In) - Not connected
> 8 (CTRLA) - Not connected
> 9 (GND) - Any of 4,8,12 (GND)
>
> TS-2000 pins not connected: 2,6,10,13
>
> Thanks,
> Nate KC2SVI
>