[amsat-bb] Re: Dual Yaesu Rigs on SatPC32

[Howard Kowall]

Hello to all
Thanks to all who replied to my post
Will try again to recal as from your emails
Will let you know how I made out
Thaks again
Howard
VE4ISP

----- Original Message ----- 
From: "Howard Kowall" <hkowall at shaw.ca>
To: <amsat-bb at amsat.org>
Sent: Sunday, December 12, 2010 7:09 PM
Subject: Re: [amsat-bb] Dual Yaesu Rigs on SatPC32


> Sorry the rigs I am using are the following
> FT817ND VHF / Ft897D UHF
> Howard
>
> ----- Original Message ----- 
> From: "Howard Kowall" <hkowall at shaw.ca>
> To: <amsat-bb at amsat.org>
> Sent: Sunday, December 12, 2010 6:54 PM
> Subject: [amsat-bb] Dual Yaesu Rigs on SatPC32
>
>
>> Hello to all
>> Trying to cal my dual rig control on SatPC32 V12.8a
>> I adjust the receive cat till I hear my voice proper aprox  -1.3 kHz on 
>> FO29
>> I reset it to 0 then adjust the cat for transmitter to +1.3kHz
>> I click change/store data file button,then click uplink cal button
>> I restart SatPC32 and try again on FO29 now I am out aprox -2.6khz
>> Anyone else had any Issues,I read the Doppler.sqf file and the math is 
>> correct
>> Hmm
>> Thanks all who read and reply
>> Howard
>> VE4ISP
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite 
>> program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>