[amsat-bb] Re: Two configurations of SatPC32 ?

[Jeff KB2M]

What ver of PCSat32 are you running Dick? In latest ver 12.8a you can setup
4 different configurations. I used to run two or three different copies, but
with the new stored configuration ver you now don't have to...

73 Jeff kb2m


-----Original Message-----
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of Richard Ferryman
Sent: Sunday, December 19, 2010 12:46 PM
To: amsat-bb at amsat.org
Subject: [amsat-bb] Two configurations of SatPC32 ?

I use SatPC32 configured for two FT-817 transceivers for cross band duplex
working.  One rig is on the 2m aerial and the other on the 70cm aerial with
a transfer switch for V/U or U/V. I have to switch the configuration to one
transceiver and reboot for in-band simplex such as packet on ISS.  Is
possible to have two installations of SatPC32 or two configuration settings
so I can just boot the configuration I need - (one radio or two radios)?
Richard (Dick) G4BBH
_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb