[amsat-bb] Re: New Lindy's QRV

[Joel Black]

Enjoyed your webpage, Ed.

Probably going to take down the AO-10 antennas here and put up something
much simpler such as your Lindenblads or a couple of TPM's.  The AO-10 setup
is way overkill for what is up there and I'd rather use my tower for
something other than satellites.

Good luck with your antennas.

73,
Joel, W4JBB

On Sat, Feb 6, 2010 at 2:03 PM, Edward Cole <kl7uw at acsalaska.net> wrote:

> Just a note that I copied HO-68 beacon yesterday on my new Lindenblad
> antennas.
> I have updated the webpage:
> http://www.kl7uw.com/LBant.htm
>
> I am only running mode-VU with the "Lindys" because the UHF antenna
> has a preamp and the VHF one does not.
>
> My directional satellite array is not quite QRV; needs cables
> connected in shack.
> They have full capability for modes; VU, UV, US, VS, LU, LS
> So I will not be on AO-7, VO-52, or FO-29 quite yet.
>
> 73, Ed - KL7UW, WD2XSH/45
> ======================================
>  BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
> 500-KHz/CW, 144-MHz EME, 1296-MHz EME
> DUBUS Magazine USA Rep dubususa at hotmail.com
> ======================================
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>



-- 
Joel Black
jbblack(at)charter.net