[amsat-bb] Re: TS2000 on dualband antenna (for sat work)

[David Barber]

It works fine.

Used a TS2000E via a MX2000 tri-plexer to a co-linear both u/v and v/u with
no problems.  Worked the States and Canada this way via F0-29.

Also used a Create CLP5130 log periodic connected in the same way.

Just keep the TX power as low as is needed to hear your own signal and no
more.

David
G8OQW

******** 

-----Original Message-----
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of PA3GUO
Sent: 09 June 2010 20:36
To: amsat-bb at amsat.org
Subject: [amsat-bb] Re: TS2000 on dualband antenna (for sat work)

Hi John
Let me try tomorrow and report back, I have never tested this.
Henk, PA3GUO


Has anyone on the list tried using a Kenwood TS2000 on full duplex satellite

operatation using a dualband VHF/UHF antenna and a diplexer?  Is it possible
or 
is there too much desensitization thru the diplexer to make full duplex
work?

73s John AA5JG


_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb