[amsat-bb] RCI-SE G5500 Interface

[Dean Maluski]

Trying to setup Sat32PC, I have a G-5500 rotor and using an RCI-SE
control board.

I have been using Linux gpredict and hamlib to control rotor OK but
wanted to try Sat32PC so trying setup a system.

ARSWIN says I'm at 45 degrees when antennas are actually at 90 degrees.
If I tell ARSWIN to go to 90 degrees antennas will then be at 180
degrees.

Nowhere in setup can I find something to correct this.