[amsat-bb] Re: ARISSat-1 over West Malaysia

[Alan P. Biddle]

Sion,

Glad the simple solution worked.  For others reading this, if the simple
solution does not work, try the complicated one I gave. I always use the
File | Exit method of closing a program for exactly this reason.  In my
case, it didn't work.   

73s,

Alan
WA4SCA

 

-----Original Message-----
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of Sion Chow Q. C.
Sent: Friday, August 05, 2011 8:50 AM
To: Masahiro Arai
Cc: amsat-bb at amsat.org
Subject: [amsat-bb] Re: ARISSat-1 over West Malaysia

Hi Maza-San,

Just tried this and yes it works FB. Thank you for your help.

And also thank you Alan for the reply.  This is something that I could look
out for future other problems with Windows 7.

73, Sion, 9M2CQC



On 5 Aug 2011, at 09:07 PM, Masahiro Arai <m-arai at a.email.ne.jp> wrote:

> Sion,
> 
>> 1. Is it possible to have the callsign and forwarding telemetry option  
>> always set in ARISSsatTLM?  This way, we do not have to manually enter  
>> the callsign and enable telemetry forwarding each time the program  
>> starts up.
> 
> When you close ARISSatTLM, did you push X button on right upper corner?
> This way could not save the setting in config file.
> 
> Set your callsign and select File - Exit to close ARISSatTLM. Then the
> config file is updated. You will find your callsing is keeping next
> start up.
> 
> I find this manner just today.
> 
> 
> 73
> 
> 
> Masa  JN1GKZ
> 
> 
> 
> 
>> Dear All,
>> 
>> It was great to receive ARISSsat-1 over West Malaysia during 5th  
>> August 2011, 0223 UTC pass.  Maximum elevation was 89 degrees.
>> 
>> The downlink of both 145.919 MHz USB and 145.950 MHz FM was 59+60db,  
>> very strong but with huge QSB observed.  A total of 3 SSTV pictures  
>> were forwarded to the ARISS SSTV gallery and some telemetry/Kursk data  
>> were forwarded by ARISSatTLM.
>> 
>> Congratulations to all those involved with ARISSsat-1 and we look  
>> forward to trying out the transponder on the next pass.
>> 
>> A few questions I have if someone could please help me clarify them:
>> 1. Is it possible to have the callsign and forwarding telemetry option  
>> always set in ARISSsatTLM?  This way, we do not have to manually enter  
>> the callsign and enable telemetry forwarding each time the program  
>> starts up.
>> 2. Does the CW beacon needs to be really +/- 100 Hz of the yellow  
>> line?  The reason for this is that I would like to see how much offset  
>> should I apply to doppler control, for possible automated reception.
>> 3. In low power (eclipse) mode, how often does the BPSK1000 telemetry  
>> transmits?
>> 
>> Thank you.
>> 
>> 73,
>> Sion Chow Q. C.,
>> 9M2CQC,
>> Also: WQ2C /HL1, 9V1QC, JG1XHM
>> ex: 9W2QC, AB3IO
>> 
>> 
>> 
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite
program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> 
> 　
> 

_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb