[amsat-bb] G5400 elevation issue

[Dave Webb KB1PVH]

The display on the control box reads correct elevation,  but on my digital
display on the Easy Rotor Controller shows erratic elevation position. I
have recalibrated it several times with no success. It won't read any
elevation until it is around 20° give or take. It also seems to have become
worse since our really cold temps set in. My best guess is the pot in the
rotor, but not sure where to start in the process.

Thanks in advance

Dave - KB1PVH

Sent from my Verizon Wireless DROID X