[amsat-bb] Res: Receiving Packet using MixW?

[Carlos Paoli]

Hi Trevor,

If my memory does not fail, try this:

Make sure you check the sound card configurations, check
the level of line-in is a good level audio, based on the waterfall
with the radio on and the open squelshe.
Also check the connection between audio output of radio and
line-in PC.

Go to "Mode", select "Packet", still in "Mode" go to "Settings Mode" in 
"General" tab, "Incomings MyCalls" putting your call sign. In the tab "Modem" 
choice  "VHF 1200 baud (Standard  1200/2200Hz)",
click OK to finish.

To connect a station go to "Mode", "Connect" in the "My Call" put your
call, in the "Remote" put the call of the desired station, Click the
"Connect", is done.


VY 73 de Carlos Paoli - PY2FFZ




________________________________
De: Trevor . <m5aka at yahoo.co.uk>
Para: amsat-bb at amsat.org
Enviadas: Terça-feira, 4 de Janeiro de 2011 18:40:13
Assunto: [amsat-bb]  Receiving Packet using MixW?

Hi, 

I'm trying to receive 1200bps FM packet using the MixW program but am unable to 
get it to decode anything. 


If anyone has had success with this program or can point me to an idiots guide 
to setting it up please contact me off-list.

73 Trevor M5AKA