[amsat-bb] Re: Zack's Setup

[Zachary Beougher]

Hi John,

I began experiencing the same issue again yesterday, and after some testing 
I discovered the center conductor in the 2m side of the duplexer was loose. 
Time to replace a connector I guess.

73!

Zack
KD8KSN

-----Original Message----- 
From: John Neeley
Sent: Wednesday, January 12, 2011 6:44 PM
To: Clint Bradford ; AMSAT BB
Subject: [amsat-bb] Re: Zack's Setup

Or could it be that overpriced Diplexer in the handle??  Can you seperate 
the 2
bands and test without the Diplexer??

John W6ZKH






________________________________
From: Clint Bradford <clintbradford at mac.com>
To: AMSAT BB <amsat-bb at amsat.org>
Sent: Wed, January 12, 2011 2:44:17 PM
Subject: [amsat-bb] Re: Zack's Setup

>> ... having a hard time with the Arrow ... stuck the duck on, and I can 
>> get into
>>all the repeaters fine ...

Check out Arrow ops on both 2M and 440 - and see if there might be a short 
or
problem with either of the gamma matching elements.

Are there any connectors or jumpers between the Arrow's leads and your
equipment? If so, check their integrity.

It just sounds like it's going to be a simple fix, Zack!

Clint, K6LCS
909-241-7666
_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb