[amsat-bb] Re: Rotor Interface Yaesu 5500

[Bill Gillenwater]

Using FT 847.

73 Bill

----- Original Message ----- 
From: "Dee" <morsesat at optonline.net>
To: "'Bill Gillenwater'" <k3sv at pa.net>; "'AmsatBBS'" <amsat-bb at amsat.org>
Sent: Saturday, January 22, 2011 11:04 AM
Subject: [amsat-bb] Re: Rotor Interface Yaesu 5500


> Bill,
> There is a nice interface being sold by AMSAT - LVB tracker box...Only 
> need
> an RS232 or USB to operate it running SatPC32... You didn't mention what 
> rig
> you have - you can interface with that via SatPC32 also  - See the ad at 
> the
> AMSAT website...
> Good luck,
> Dee, NB2F
>
> -----Original Message-----
> From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
> Behalf Of Bill Gillenwater
> Sent: Saturday, January 22, 2011 10:20 AM
> To: AmsatBBS
> Subject: [amsat-bb] Rotor Interface Yaesu 5500
>
> OK, a newbee question about interfacing rotors. I have a Yaesu 5500 and I
> run PCSat32. What do I need between the rotor and the computer? I would 
> like
> a few options. Do I need the Yaesu 232 interface box or will a generic box
> do the job. If a generic box will work, which are the best for satellite
> work with PCSat32?
>
> Tnx 73 Bill K3SV
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb