[amsat-bb] Re: SSB Operation on the satellites.

[i8cvs]

Hi Doug, KA9DLP

Hold the RX steady and adjust the TX for doppler.This is what I did
manually from OSCAR-6 and I do actually on VO-52, FO-29 and
OSCAR-7

73" de

i8CVS Domenico

----- Original Message -----
From: "Douglas Phelps" <dphelps1 at ameritech.net>
To: <amsat-bb at amsat.org>
Sent: Thursday, June 09, 2011 2:59 AM
Subject: [amsat-bb] SSB Operation on the satellites.


I am new to the satellites. Got to where I can hear my downlink if the bird
is
higher than 15 degrees. My question is about handling the doppler shift.

If you do not have a sat program automatically correcting you rig frequency,
what is the most common or preffered technique? 1 - Hold the TX steady and
adj
the RX for doppler or 2- Hold the RX steady and adjust the TX for doppler? I
know this must be a basic question but I am learning. Thanks,

Doug
K9DLP
_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb