[amsat-bb] Re: Fw: O\OREOS Help

[Alan P. Biddle]

Jack,

>>  O\OREOS,437.3050,AX.25,NOR,0,0;1200 Baud

It normally appears in the Keps as OOREOS.  They must match exactly for
SATPC32 to match the two, unless you use the AMSATNAMES.TXT file.  Also,
AX.25 is the way it sends data, not the mode your radio should be tuned for,
FM.  Finally, the data is entered in the wrong order.  It should look
something like this:

OOREOS,437.305,0,FM,,,0,0,1200 Baud

I don't follow O\OREOS, but this should get you closer.  Perhaps someone who
does can paste in his known working configuration.  There is a good
discussion at the end of the DOPPLER.SQF file of the allowable modes, etc.

Alan
WA4SCA



 

-----Original Message-----
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of Jack Barbera
Sent: Monday, June 20, 2011 1:02 PM
To: Amsat Reflector
Subject: [amsat-bb] Fw: O\OREOS Help




Jack WA1ZDV

----- Forwarded Message -----
From: Jack Barbera <barberaalderwood at yahoo.com>
To: "amsat-bb-request at amsat.org" <amsat-bb-request at amsat.org>
Sent: Sunday, June 19, 2011 2:58 PM
Subject: O\OREOS Help




Need a little help.Trying to add O\OREOS to my Doppler.SQF file in note pad.
Have entered 
O\OREOS,437.3050,AX.25,NOR,0,0;1200 Baud
This does not work for me.What did I do incorrectly?Can anyone help?
Thanks 
Jack WA1ZDV
_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb