[amsat-bb] Re: RAX-2 Decoding

[James Cutler]

Hi Carl,  I have not used AGWPE before as a TNC.  How does it output it's
data?  A virtual serial port?

--Jamie, KF6RFX



On Fri, Oct 28, 2011 at 10:59 AM, Carl Rimmer W8KRF <w8krf at w8krf.net> wrote:

> I have installed the RAX-2 decoding software hoping to be able to copy and
> decode the telemetry.  I am using a TS-2000 with a SignaLink USB and AGWPE
> as the TNC.  I am not able to get the software to recognize this set up.  I
> have AGWPE setup in Kiss Simple mode at 9600 Baud.  (I use the SignaLink
> with the ARISSATTLM software and it works fine.)  Can anyone tell me if this
> setup will work with the RAX-2 software?  If so, what am I not doing or
> doing wrong?
>
> Thanks and 73,
> --
> *Carl W8KRF*
> ______________________________**_________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/**listinfo/amsat-bb<http://amsat.org/mailman/listinfo/amsat-bb>
>