[amsat-bb] Re: PW-Sat signals decoded @ ISIS

[wouter weggelaar]

Hi Mark,

I have used the ISIS internal decoding software.
I'm not sure if the polish team provides a client to collect and
submit telemetry.
We can understand parts of their ASCII telemetry by reading the values
and converting them using various product manuals.

According to me, I had the very first packet received (a couple of
minutes before the pass over Poland)

73

Wouter
PA3WEG

On Tue, Feb 14, 2012 at 2:53 AM, Mark L. Hammond <marklhammond at gmail.com> wrote:
> Congratulations, Wouter.
>
> Is there a client software for amateurs to collect and submit telemetry?
>
> If so, where can it be downloaded?
>
> Thanks,
>
> Mark N8MH
>
>
> At 05:41 PM 2/13/2012 +0100, wouter weggelaar wrote:
>>Hi All,
>>
>>
>>PW-Sat has been decoded using the ISIS GSKit on the first and 3rd pass
>>of PW-SAT over Delft.
>>
>>On the third pass we also connected SDR hardware to 70cm to listen for
>>the other cubes
>>A spectrum plot can be found at
>>http://www.pa3weg.nl/pa3weg/images/Spectrum_plot_PA3WEG_3rd_pass_1537UTC.jpg
>>and the recording of PW-SAT at
>>http://www.pa3weg.nl/pa3weg/recordings/PW-SAT%20recording%20PA3WEG%2013-02-2012_1207UTC.mp3
>>
>>As you can imagine, all our engineers gathered around when they heard
>>familiar BPSK 1200 sounds ;)
>>http://www.pa3weg.nl/pa3weg/images/TrackingVEGA01.jpg
>>http://www.pa3weg.nl/pa3weg/images/TrackingVEGA02.jpg
>>
>>We have heard:
>>- PW-Sat
>>- MaSat-1
>>- XatCobeo
>>- Probably AlmaSat
>>
>>Nothing heard from Goliat, Robusta and UniCubeSat
>>
>>Wouter Weggelaar
>>PA3WEG
>>ISIS RF Engineer
>>_______________________________________________
>>Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>