[amsat-bb] Re: IC-910H Transceiver Question

[Jim Bennett]

It is metric.  4x.7
Ke4kol
Jim


-----Original Message-----
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of WB2LLP
Sent: Wednesday, October 03, 2012 6:30 PM
To: AMSAT -BB
Subject: [amsat-bb] IC-910H Transceiver Question

For many years I have used this Transceiver intermittently as a receiver in
a protected location, so I never got around to grounding it.  Now I am not
in a protected location and want to transmit,  so the Transceiver  must be
grounded.   I  check the manual  on page 14.  Yes, there is an empty,
threaded  location on the back panel for  the ground connection,  but it
does not say what thread the connection has. Now this normally would not be
a big deal, as I would go to my bucket of nuts and bolts and get a few bolts
and find which one had the correct thread.   Unfortunately, I am not  near
my normal location and the junk box so  I look more carefully at the manual
for  the thread size and do not find the information.

If someone reading this knows the thread size I would appreciate it if you
would let me know, so I can go get one,
maybe two so I will have a spare,  and then mark up my manual.
. 
TNX

73 de WB2LLP   
 Gene Marks
_______________________________________________
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb