[amsat-bb] Re: APRS/Packet on IC-910H

[Andrew Glasbrenner]

I use MixW and a rigblaster for 1200 baud AFSK and BPSK, and a hardware TNC for 9600 baud. 

73, Drew KO4MA


-----Original Message-----
>From: Les Rayburn <les at highnoonfilm.com>
>Sent: Apr 23, 2013 3:53 PM
>To: amsat-bb at amsat.org
>Subject: [amsat-bb] APRS/Packet on IC-910H
>
>I'd also like to add digital capabilities to the IC-910H to allow some 
>digital contacts through ISS, or just to download telemetry on other 
>birds. Never worked packet before, and have only limited experience with 
>APRS.
>
>The IC-910H is equipped with a Signa-Link interface for soundcard modes, 
>and I've worked quite a bit of WSJT FSK and JT65A. I know that there is 
>a software
>"solution" for APRS using AGWPE but I haven't tried it.
>
>What would be the recommendations of the group for equipping my station 
>for digital operation on the satellites? AGWPE and the soundcard 
>interface or a TNC? If so,
>what TNC would be recommended?
>
>Did I say "Thanks" yet? Also appreciate the bandwidth on this 
>reflector--I know newbie questions can be annoying.
>-- 
>73,
>
>Les Rayburn, N1LF
>121 Mayfair Park
>Maylene, AL 35114
>EM63nf
>
>6M VUCC #1712
>AMSAT #38965
>Grid Bandits #222
>Southeastern VHF Society
>Central States VHF Society Life Member
>Six Club #2484
>
>Active on 6 Meters thru 1296, 10GHz & Light
>
>_______________________________________________
>Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb