[amsat-bb] Re: FW: SATPC32 & AO73 question

[Alan]

Ted,

Ah, will need to add the VFO/Mem button to my things to check.  I changed rigs 2 years ago, and I
forget some of the gotchas.

The Mode setting is correct.  Doppler Shift is fine, and probably more intuitive for most.

73s,

Alan
WA4SCA
 

<-----Original Message-----
<From: Ted [mailto:k7trkradio at charter.net] 
<Sent: Sunday, December 01, 2013 3:59 PM
<To: APBIDDLE at mailaps.org; 'AMSAT-BB'
<Cc: 'CC'
<Subject: RE: [amsat-bb] Re: FW: SATPC32 & AO73 question
<
<Thanks Alan,
<
<All of those items are as they should be. I did end up pushing 
<the vfo/m
<button and something changed. The freqs are where they should be and
<holding. Radio and program are displaying the same numbers
<
<Question on a setting: under Mode, 'uplink+downlink' checked 
<and 'doppler
<shift' checked...is that ok?
<
<Thanks again
<
<73, Ted
<
<-----Original Message-----
<From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
<Behalf Of Alan
<Sent: Sunday, December 01, 2013 11:25 AM
<To: 'AMSAT-BB'
<Cc: CC
<Subject: [amsat-bb] Re: FW: SATPC32 & AO73 question
<
<Ted,
<
<Some questions. 
< 
<Does this problem only happen on AO-73, or all of them?  
<In the Radio Setup, do you have Satellite Mode (Satelliten 
<Modus) checked?
<Is the SAT mode light on under CAT control?
<Do you have the FT-847 TRACK mode selected?  If so, turn it off as in
<conflicts with the CAT control.
<
<Are you using a USB dongle for a serial port?  What is the CAT 
<port delay?
<
<73s,
<
<Alan
<WA4SCA
<
<
<
<<-----Original Message-----
<<From: amsat-bb-bounces at amsat.org
<<[mailto:amsat-bb-bounces at amsat.org] On Behalf Of Ted
<<Sent: Sunday, December 01, 2013 12:44 PM
<<To: 'AMSAT-BB'
<<Subject: [amsat-bb] FW: SATPC32 & AO73 question < <Any help 
<appreciated <
<<73, Ted < <-----Original Message-----
<<From: amsat-bb-bounces at amsat.org 
<[mailto:amsat-bb-bounces at amsat.org] On
<<Behalf Of Ted
<<Sent: Friday, November 29, 2013 2:23 PM
<<To: 'AMSAT-BB'
<<Subject: [amsat-bb] SATPC32 & AO73 question < <Hi all, < < < 
<<In spite of
<my usual ineptness with this program, I have <managed to have 
<it <talking to
<my FT-847, downloaded the keps for AO73 and appear <to be 
<tracking <it!!
<<
<<
<<
<<However, I can't seem to get the radio to hold the up/dn 
<<frequencies in
<the <proper VFO's. I start out with the uplink showing in 
<VFOA, but <after a
<min <or so the frequencies swap and I have to use the a><b 
<button <to get
<them <back.
<<
<<
<<
<<Am I missing a setting?
<<
<<
<<
<<Any help appreciated
<<
<<
<<
<<And Happy Thanksgiving to all
<<
<<
<<
<<73, Ted
<<
<<K7TRK
<<
<<_______________________________________________
<<Sent via AMSAT-BB at amsat.org. Opinions expressed are those of 
<<the author.
<<Not an AMSAT-NA member? Join now to support the amateur 
<<satellite program!
<<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
<<
<<
<<_______________________________________________
<<Sent via AMSAT-BB at amsat.org. Opinions expressed are those of 
<<the author.
<<Not an AMSAT-NA member? Join now to support the amateur 
<<satellite program!
<<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
<<
<
<_______________________________________________
<Sent via AMSAT-BB at amsat.org. Opinions expressed are those of 
<the author.
<Not an AMSAT-NA member? Join now to support the amateur 
<satellite program!
<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
<
<