[amsat-bb] Re: psk-1 tnc-nb96 question

[Mike Nettles]

>From the link you posted looks like I have to use the TNC-MB96 and PSK-1 together to use it for regular 9.6k packet but I'm sure the TNC-MB96 could work by itself. I'll look at the jumper settings..ect and see what I can findout. Sure wish there were some birds up that I could use this with.  
Thanks for the reply,
73
Mike kb5wbh
  ----- Original Message ----- 
  From: Stefan Wagener 
  To: Mike Nettles 
  Sent: Saturday, June 15, 2013 7:57 AM
  Subject: Re: [amsat-bb] psk-1 tnc-nb96 question


  Looking at this:

  http://www.amsat.org/amsat/archive/amsat-bb/200003/msg00528.html


  it looks like it should work.


  Stefan




  On Fri, Jun 14, 2013 at 10:44 PM, Mike Nettles <Mike_Nettles at centurytel.net> wrote:

    I picked this up a while back and it came with all the docs, jumper info..ect. Can these be used for 9.6k baud regular packet? I hooked up the tnc and it comes on with WA8DED Tnc Firmware V 2.6 . If it can be used for regular packet can that firmware be replaced?
    Thanks
    73
    Mike kb5wbh

    _______________________________________________
    Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
    Not an AMSAT-NA member? Join now to support the amateur satellite program!
    Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb