[amsat-bb] Re: Satpc32 Storing Rx/Tx addreses

[Alan]

Carl,

Perhaps someone with first hand experience will have a suggestion.  

73s,

Alan
WA4SCA
 

<-----Original Message-----
<From: carl creamer [mailto:ccreame at pacbell.net] 
<Sent: Sunday, September 29, 2013 5:00 PM
<To: APBIDDLE at MAILAPS.ORG
<Subject: Re: [amsat-bb] Satpc32 Storing Rx/Tx addreses
<
<Thanks Alan:
<Well for some reason it does not work for me.
<My Radio is set as IC-821h which requires addresses of $4c $4c
<When I open the the set up window after a restart the address 
<show up as $60 $60, which is for the 910h I believe so I 
<change it to  setup/radio setup/addresses/$4c $4c/addresses OK
<And then I do the mode/addresses $4c $4c save and store. Then 
<restart  Satpc and both the Mode and setup addresses show up 
<again as $60 $60 and I have to change them to $4c $4c again .
<So I must be doing something wrong , but I don't know what it is.
<any suggestion?
<Thanks
<Carl
<
<________________________________
<
<From: Alan <wa4sca at gmail.com>
<To: 'carl creamer' <ccreame at pacbell.net>; AMSAT-BB at amsat.org 
<Cc: CC <APBIDDLE at UNITED.NET> 
<Sent: Sunday, September 29, 2013 2:33 PM
<Subject: RE: [amsat-bb] Satpc32 Storing Rx/Tx addreses
<
<
<Carl,
<
<I don't use Icoms now, but I tried configuring for one.  
<Everything worked fine, and the values I set
<were retained when I restarted the program.  There is an 
<additional Addresses OK button to the left
<which I needed to click, in addition to the usual Store.
<
<73s,
<
<Alan
<WA4SCA
<
<
<<-----Original Message-----
<<From: amsat-bb-bounces at amsat.org 
<<[mailto:amsat-bb-bounces at amsat.org] On Behalf Of carl creamer
<<Sent: Sunday, September 29, 2013 2:10 PM
<<To: AMSAT-BB at amsat.org
<<Subject: [amsat-bb] Satpc32 Storing Rx/Tx addreses
<<
<<I'm having an issue with having Satpc32 storing the Mode/Rx/Tx 
<<addresses.
<<When I start the program, I store the correct settings for my 
<<Icom and it all works fine , but when I reboot and/or restart 
<<the Satpc32 later I have to go to the mode screen and reset 
<<the Mode/Rx/Tx addresses.
<<Is this normal or is there a way to have them permanently stored?
<<Thanks
<<Carl
<<_______________________________________________
<<Sent via AMSAT-BB at amsat.org. Opinions expressed are those of 
<<the author.
<<Not an AMSAT-NA member? Join now to support the amateur 
<<satellite program!
<<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
<<
<
<
<
<
<