[amsat-bb] Re: Icom 9100 interface

[WA6FWF]

George,
     Assuming that you already loaded the Icom drivers on the PC  and 
the 2 comm ports show up in your hardware list then setting up SatPC32 
should be a breeze, "setup-radio-radio1 "icom"  model IC-9100, baud rate 
19200, addresses $7C $7C com-port # "
the baud rate and addresses are the default for the 9100, if yours are 
different then of course adjust the values to match your 9100.


I'm guessing you have missed a step somewhere...

73
Kevin wa6fwf

On 4/18/2014 7:02 AM, george hinkle wrote:
> I have an Icom 9100 been using if for a good time now. I'm using SatPC32 which works very well with their driver .....if you can get it to work. I did it two years ago but now I have two new computers and can't get it to work now.
> Any one to help out there?
> george wi9i
>   
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>