[amsat-bb] CAT control for TX and RX

[Stephen E. Belter]

Yes.  For example, SatPC32 will control two radios and run Doppler correction on both.  The receiver can be HDSDR.

In my case, I'm using SatPC32 to control HDSDR with a FUNcube Dongle Pro+ and an Icom IC-821.

73, Steve N9IP
--
Steve Belter, seb at wintek.com



On Jun 21, 2014, at 7:32 AM, Stu2 <stu at stu2.net> wrote:

> I'm preparing for Field day and would like to use a combination of HDSDR
> (RX) and a Kenwood TS-2K (TX) radio. The RTL-SDR dongle and preamp make
> a great RX. Ham Radio Deluxe only connects to a single radio. (Transceiver)
> 
> Is there a way to control both radios at once to correct for Doppler? 
> 
> The problem would be similar to controlling two FT-817s, except both
> radios would be different in my case. 
> 
> Thanks and 73's
> 
> Stu2
> W7IY
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb