[amsat-bb] Re: SatPC32 Doppler problem

[George Henry]

I know this is super-basic, but did you click on the "C-" (turning it to 
"C+") in the upper left portion of the program window to enable computer 
control of the radio?


George, KA3HSW


> <-----Original Message-----
> <From: amsat-bb-bounces at amsat.org
> <[mailto:amsat-bb-bounces at amsat.org] On Behalf Of Keith McDonnell
> <Sent: Thursday, May 01, 2014 7:48 PM
> <To: "amsat-bb at amsat.org"@optonline.net
> <Subject: [amsat-bb] Pcsat32 doppler problem
> <
> <" <amsat-bb at amsat.org>
> <Content-Transfer-Encoding: quoted-printable
> <Mime-Version: 1.0 (1.0)
> <
> <I know I'm missing something simple but I just cant find it. I
> <have pcsat32 r=
> <unning under windows 7 to controll my kenwood ts-2000. If i
> <click on a satel=
> <lite, the rig goes to the appropriate mode and frequency. The
> <program then s=
> <tarts the doppler adjustment but the frequency on the rig
> <never changes. If I=
> < turn the tuning knob on the rig, the new frequency doesnt
> <transfer to the p=
> <rogram. I have another control program which works fine, so
> <the hardware is i=
> <ntact, so its something i have done wrong in the set up. I
> <have checked baud=
> < rate, com ports and such and all are correct. Thank you for
> <all your help. 7=
> <3, keith kg2ix=