[amsat-bb] ICOM 706G phase noise

[Doug - k4gkj]

My 706mk2g doesn't do this. And at the moment, I have a diplexer on my tower to have one feedline share  VHF & UHF antennas...  I am not happy with the 2.5db+ of loss that comes along with putting that diplexer on...  
Doug 
K4GKJ 


Doug Bennight
K4GKJ
850-528-5772
850-926-2052 




-------- Original message --------
From: Paul Stoetzer <n8hm at arrl.net> 
Date:  
To: David G0MRF <g0mrf at aol.com> 
Cc: amsat-bb at amsat.org 
Subject: Re: [amsat-bb] ICOM 706G phase noise 
 
David,

Try a diplexer on either the transmit or receive side (whichever works
better) with the common port to the antenna, the appropriate band port
hooked to the radio, and the other band port left disconnected. If
your Icom is putting something out on 2m when transmitting on 70cm,
that should filter it out.

73,

Paul, N8HM

On Fri, Oct 31, 2014 at 12:41 PM, David G0MRF <g0mrf at aol.com> wrote:
>
> Hi all.
>
> Inspired by the FUN on the YouTube videos from the car park at Baltimore, I've been trying to set up a satellite station using two independent radios. An IC706G on 70cm transmit and an FT736R on 2m receive.
> Antennas are  a 4 ele yagi ( horizontal ) on 2m receive with an AMSAT-UK filtered preamp. Transmit antenna is a 9 ele Tonna mounted vertically.
> Antennas are on a rotator using a fibreglass boom about 1.8m long.
>
> The problem:  Whenever I press the 70cm transmit 'button'  - ptt on SSB, or key on CW I get S8 noise on the 2m receiver. (and S6 without the preamp)
>
> Note...This does not appear to be RF overload as I can turn the power down to minimum on SSB, even remove the microphone and the noise level remains.
> On CW the noise level is constant when the 706 is in transmit mode. It does not appear and disappear with each dot or dash.
>
> My conclusion is that on 70cm the IC706G is transmitting something on 2m whenever it is in it's transmit mode.- possibly phase noise.
>
> Has anyone else come across this issue with ICOMs or is it just this one? and is there a known minimalist solution.
>
> Many thanks
>
> David  G0MRF
>
>
>
>
>
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb