[amsat-bb] Question on G-5500 Control box

[Kevin Schuchmann]

Darrell,
   you can either recalibrate the  LVB to the new settings or manually 
move the rotor to 360 or 450 AZ and 90 or 180 EL  and adjust the pots 
until the LVB shows the same reading, if you moved the pots a bunch I 
suspect that telling the LVB to go to a point does not match the meters 
anymore.

Kevin wa6fwf

On 4/5/2015 3:42 PM, W4CX wrote:
> When setting the AZ and EL full scale adjustment on the back of my G-5500, I
> accidentally disturbed the other pots labeled "Out Voltage Adj".  The
> instruction manual doesn't mention these pots and the schematic looks like
> they set the voltage for the DIN connector feeding my LVB tracker. Looking
> for advice on how to (re)set these pots correctly.
>
>   
>
> Thanks in advance.
>
> Darrell W4CX
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>