[amsat-bb] Sat32PC talking to radios question

[Daryl Young]

Also, for Icom the address must match what is set in the radio.

*Daryl
K4RGK


*
On 12/31/2015 11:46 AM, kk5do at att.net wrote:
>   blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important;  padding-left:1ex !important; background-color:white !important; }  make sure you have correct radios selected in satpc32. ports and baud rate.
> 73...bruce
>
> Sent from my iPhone
>
>
> On Thursday, December 31, 2015, 10:40 AM, Brian Sarkisian, KG8CO via AMSAT-BB <amsat-bb at amsat.org> wrote:
>
> I recently installed the Sat32PC program and it doesn't look like the program is talking with the radios.
> I am using an IC-7000 and a FT-100D as the two radios.
> I have set up both radio's comport information and at this point I do not have a rotor.
> I see that SatPC32 is tracking as the frequency changes, however, the radios aren't doing anything.
> What am I missing?
>
> Thank you
>
> Brian, KG8CO
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
>   
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb